RCT Axpert ESS 8KVA/KWEnergy Storage System Inverter

INTRODUCTION
This energy storage system can provide power to connected loads by utilizing PV power, utility power and
battery power and store surplus energy generated from PV solar modules for use when needed. When the
sun has set, energy demand is high, or there is a black out, you can use the energy stored in this system to
meet your energy needs at no extra cost. In addition, this energy storage system helps you pursue the goal
of energy self co nsumption and ultimately energy independence.

Features
Pure sine wave inverter
Customizable status LED ring with RGB lights
Touchable button with 5” colored LCD
Built in Wi Fi for mobile monitoring (APP is
Supports USB On the Go function
Built in anti dusk kit
Reserved communication ports for BMS (RS485, CAN BUS, RS232)
Configurable input voltage ranges for home appliances and personal computers via LCD control panel
Configurable output usage timer and prioritization
Configurable charger s ource priority via LCD control panel
Configurable battery charging current based on applications via LCD control panel
Compatible to utility mains or generator power

Inverter Specs:
Rated Output Power – 8000W
Output Voltage Waveform – Pure Sine Wave
Output Voltage Regulation – 230Vac±5
Output Frequency – 60Hz or 50Hz
Peak Efficiency – 93%
Overload Protection – 100ms@=205% load 5s@=150% load 10s@110%~150% load
Surge Capacity – 2* rated power for 5 seconds
Low DC Warning capacity – Setting of Program 29 + 10%
Low DC Cut off level – Setting of Program 29
High DC Recovery Voltage – 52.5 Vdc (ESS LIO I 4810)4810),56 Vdc (ESS LIO II 4810
High DCCut off Voltage – 54 Vdc (ESS LIO I 4810); 57 .5Vdc (ESS LIO II 4810)
DC Voltage Accuracy – +/0.3V@ no load
THDV – <5% for linear load,<10% for non linear load @ nominal voltage
DC Offset – ?100mV
No Load Power Consumption – <75W

MPPT Charge Controller specs: (Build into Inverter) 
Solar Input Rated Power – 8000W (2 x 4000W)
Max. PV Array Open Circuit Voltage – 500Vdc
PV Array MPPT Voltage Range – 90Vdc~450Vdc
Max. Input Current – 18A x 2
Start-up Voltage – 80V +/- 5Vdc

Battery not included

PLEASE CONFIRM AVAILABILITY BEFORE PLACING YOUR ORDER